Shop All Toddlers Clothing
Toddlers can be a force of nature. Luckily forces of nature are our specialty! Reima’s range of toddler clothes is comfortable yet hard-wearing and made with little ones in mind.
Attention to detail sets us apart. Snowsuits have extra room in the seat to accommodate diapers and chin guards keep little faces protected from zippers. Sealed seams on our outerwear keep toddlers warm and dry and all our clothes have a little room to grow!
Shop our collection to find toddler snowsuits as well as coats and jackets—and don’t forget hats and mittens!
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
Warmth levels
The degrees of warmth level thermal markings are indicative. They have been prepared keeping in mind that underneath the shell layer, mid- and base layers will be worn according to the weather - the colder it is, the more warm layers will be chosen. An average time spent outdoors with this guidance is approximately an hour. If you plan to do sports / play actively, choose lighter mid-layer clothing and/or lighter outerwear.
No flakes:shell/mid-season product, no insulation.
One flake:light wadding, fleece or light down.
Two flakes:warm waddign or warm down.
Three flakes:extremely warm wadding, pearl wadding or fluffy down.
Waterproof levels
All Reima fabrics or products marked with drop symbols are waterproof. The waterproof level is indicated with water columns which tell how much water pressure the fabric endures in thickness, before water begins to pass its surface. The thickness of the water mass / pressure is stated in mm.
Water column over 3 000 mm:Protects against rain for some time.
Water column over 5 000 mm:Protects against heavy rain, too.
Water column over 8 000 mm:Is suitable for both heavy rain but also sitting on wet.
Water column over 12 000 mm:For extreme conditions. Protects in active outings in wet surroundings and in heavy rain, all-day.
Durability
Reima measures durability with a hardcore Martindale test where abrasion resistance of fabrics is tested with sand paper. Our indicated figures are not comparable with the ones of upholstery fabric testing, as they are resulted by using a woolen cloth, not sand paper. For each product we choose the best suitable and durable fabric, according to the purpose of use. Particularly durable fabrics are given a separate arrow symbol with the Martindale test value. If a product does not have this symbol, the durability measured with Martindale is less than 30 000 cycles, and possible test result indicated in the material information.
Abrasion resistance over 30 000 cycles Martindale:Very good durability, suitable for casual pants and durable jackets.
Abrasion resistance over 50 000 cycles Martindale:Excellent durability, suitable for pants and lower parts of overalls.
Abrasion resistance over 80 000 cycles Martindale:Extremely durable fabric, usually used as reinforcement material and in our most durable pants.
UV protection
With lab tests verified UV sun protection indicates how much longer a child can play in the sun without the delicate skin to burn underneath the clothing. We measure the UV cut using the standard AS/NZS 4399:1996.
UV cut 20+prevents 95% of ultraviolet radiation.
UV cut 30+prevents 96,7% of ultraviolet radiation.
UV cut 40+prevents 97,5% of ultraviolet radiation.
UV cut 50+prevents 98% of ultraviolet radiation.
Breathability Levels
Breathability level is meant to measure fabrics that are functional: meaning they keep water out, yet allow moisture to be transferred to outer layers. Breathability can be measured by different standards. Breathability is measured in grams per square meter per day, or g/m2/24h. We use our own method to determine the breathability of our products, which is comparable to the ISO 15496 standard.
Breathability of at least 3,000 g/m2/24h:The product is suitable for everyday outings and light rain.
Breathability of at least 5,000 g/m2/24h:The product is suitable for playing outside.
Breathability of at least 7,000 g/m2/24h:The product is best for active kids / playing sports.
